EVAPO-RUST® GEL
Rust Remover For Vertical Surfaces

REMOVE RUST FROM VERTICAL SURFACES OR ITEMS TOO LARGE TO DIP
Evapo-Rust® Gel combines the rust removing power of Evapo-Rust® with the ability to cling to vertical, rusted surfaces. Simply brush on and allow an hour to work, then rinse away the rust with water. Also, it is safer than other gelled rust removers. Evapo-Rust gel does not harm copper, brass, aluminum, glass, or plastic.
Brushable
Biodegradable
Clings to vertical surfaces
No VOCs
Low Odor
How To Use Evapo-Rust® Gel
It’s very easy to use Evapo-Rust® Gel. All it takes are 3 simple steps:
Prep
Prep rusted surface
Apply
Apply gel and wait
Clean
Rinse and wipe clean
For best results, do not use in direct sunlight. Use on rusted items at temperatures between 60°F and 90°F. Clean rusted item to remove dirt, oil, grease, and loose rust scales. Apply a thick coat of Evapo-Rust® Gel to the rusted areas. Allow to work for 1 to 2 hours or until rust appears removed. Rinse off. Repeat application on heavily corroded areas. If Evapo-Rust® Gel drys on surface, the gel may require a soft brush and water to remove.
Technical Info
Click on the button to view or download a specific Evapo-Rust® Gel technical document.